Description
Johnson Controls F93B-1C Air Volume Control for Deep Wells
The F93 Series Air Volume Controls for Deep Wells control the amount of air in the residential water storage tanks of deep well water systems. Deep wells are more than 25 ft. (7.6 m) deep. F93 Series Controls automatically maintain air volume in the storage tanks of deep well water systems by allowing air to escape from the tank and into the surrounding room when the water level in the tank drops (increase of air volume). F93 deep well controls open the air valve on a fall in tank water level bleed excess air from the tank at pressures up to 100 psig (690 kPa). The F93H has a minimum pressure release valve to avoid lowering tank pressure below 25 psig (172 kPa). Use this model on applications where water may be rapidly drained. Refer to the F93 Series Air Volume Controls for Deep Wells Product Bulletin (Part No. 24-7664-3000) for important product application information.
Features and Benefits
- sturdy Noryl (high performance thermoplastic) body resists mechanical damage and corrosion
- Brass internal operating parts minimize corrosion
- Pressure tested plastic float provides long operating life
- Optional pressure gauge tapping allows mounting of a pressure gauge
Johnson Controls #F93B-1C Specifications
- Series: F93
- Max. Pressure (PSI): 100
- Float Length (In.): 3-5/8
- Height: 4-1/2"
- Compliance: SDWA
- Overall Length (In.): 9
- Type: Air Volume Control
- Length: 8-45/64"
- Float Material: Plastic
- Pressure Range: 25 to 100 psi
- Suction Port Diameter: 1/4 in
- Tank Port Standard: NPT
- Country of Origin (subject to change): Mexico
- Tether Length Min.-Max.: 3-5/8"
- Width: 1-3/8"
- Float Switch Contact Form: Normally Open
- For Use With: Deep, Shallow, and Submersible Pumps
- Float Dia. (In.): 2
- Item: Air Volume Control for Deep Wells
- Teather/Solid State: Tether
- Body Material: Thermoplastic
- Tank Port Gender: M
- Tank Port Diameter: 1 1/4 in
- Suction Port: 1/4 in PTF SAE
- Tank Port: 1-1/4 in MNPT
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office or representative. Johnson Controls shall not be liable for damages resulting from misapplication or misuse of its products.
Reviews
There are no reviews yet.